How to Con­nect the Sam­sung Galaxy S2/SII I9100 to PC via USB

 Many users who just recently bought Sam­sung Galaxy S2 I9100 struggling an issue when  tried to con­nect the phone to the PC to access the SD card though, and somehow it didn’t really work. An error message appears "Android MTP Failed!".

 Some few tips below might help you to the task and  man­aged to access the phone’s inter­nal SD card on  PC. Just ensure that you have already installed necessary drivers for your Samsung Galaxy S2 or install KIES on your PC.

Samsung Galaxy S2 connect to pc via USB

Here's how,

-Enable usb debugging from Menu > Settings > Applications
-return to home screen
-plug usb cable in
-pull down status bar
-press ‘ connect usb storage’ button

or try this method:

Alternatively, without USB debugging enabled

Go to Settings > Wireless & Network > USB utilities and click the button > then (and ONLY then) plug in USB cable

Hope this helps...

40 comments:

Thank you so much for this useful information :)

Thanks.. searched all over in androidforums.. did not get a clue on how to get my S2 to show up on my computer.. your tips helped !!!

I followed same procedure, but in task bar following error massage shows.

One of the USB Device attached to this computer has malfunctioned, and windows does not recognised it.

thanks mate for the tips

I get as far as 'USB connected' 'Click on the button below to copy files between computer and Android's USB storage' which I do and up comes the message 'USB storage in use' 'Before disconnecting USB storage, eject Android's UB storage from computer' and I click on the button 'Disconnect storage from PC' and we go back to the start of this message 'USB connected'. It is driving me mad! Any suggestions? I have tried the debugging and the straight connection - they don't work! HELP please!

i try to connect to Kies but always get a message saying "unable to connect to your device" anyone have clue on how to solve this connecting problem please email me at sales@sisolusi.com

your assistance is greatly appreciated

pls help i get while copying music files through usb data sharing..it says the file hass deep path...my id is yahoomoon@gmail.com

hi i did tht and im connected but it doesnt show on the computer and i cnt put my music and pictures on it, how can i do this


thnx

thank u did helps me

Thank you!!
I found this on google , really helped me.

Thanks so much. I wasn't actually looking for USB storage, infact quite the opposite. I was trying to connect my phone in development mode. It worked before but somehow stopped working. I applied all the tricks I could find in the Internet. None worked. But when I turned on "connect usb storage" and then turned it off, adb suddenly recognized the device!
Don't know why but it worked and might help other looking for help regarding the same issue.
Note: THIS IS ONLY FOR ANDROID DEVELOPERS.

Thank you Very Much it worked

please help me whenever i connect my samsung galaxy s2 to pc it neither shows my camera pictures nor copies d pictures frm my computer.....pzzz do help me?

option 2 worked for me. thanks

first connect the usb to computer, then go in your mobile to settings -> wireless & network -> USB utilities then while you are connected to pc tap on the button (connect usb storage)... your phone should then appear on PC...

Followed t his procedure and regardless of whether my USB is initially connected yes or no, I always end up with the following situation:

Click on the button: Connect storage to PC

Message: ATTENTION, USB is connected. Remove the cable

This is crap

How to set Internet Setting For tataDocomo

Its been 5 months since I got Galaxy S2. I got some strange issue. When I plug S2 in USB mode, it is being detected as some Scanner/Camera and also it shows all the folders as empty. Help is highly appreciated.

I have been trying to connect my Samsung S2 via usb ...in mass storage mode,
Settings > Wireless & Network > USB utilities and click the button > then (and ONLY then) plug in USB cable
but I am not been able to connect it, it is showing all random messages of installing drivers and I am ending up doing nothing, please help

Hi, can't connect SGS2 to my pc, always pops up massage "One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it".Pls help :)

Plug phone into computer, phones makings pinging sound and starts charging.

beyond that, it is impossible to make windows 7 even see the device on USB. "Cable is connected! Disconnect!" followed by, "Connect cable!" ..

Pretty silly.

i hv a similar problem..
i connect my phone to pc and it starts charging but it didntshow any signs of connecting and nthing comes on laptop as well ......plz help me out i m really tensed..

i hv a similar problem..
i connect my phone to pc and it starts charging but it didntshow any signs of connecting and nthing comes on laptop as well ......plz help me out i m really tensed..

THANKS!!! so helpful!

thanx a lot...struggled my butt off...

Cable is connected ,charging is happening but no recognition of device.

http://drivers.downloadatoz.com/tutorial/23906,samsung-galaxy-s2-android-2-3-phone-usb-drivers-download.html

If for some reason your phone stops being seen in Windows (in the device manager you've got lots of unrecognized devices), try this out, it saved me:
Before connecting the phone, open the keypad and dial *#7284#
you will see a menu for UART and USB.
Under USB, select PDA. If PDA is already selected, select MODEM and then back to PDA
Connect: everything works again. Wonder why the phone sometimes blows a fuse...

i also get charging but "usb device not recognized"
tried *#7284# no luck.
pulled the phone apart solderjoints look good on the usbmicro
is this a hardware issue????

If for some reason your phone stops being seen in Windows (in the device manager you've got lots of unrecognized devices), try this out, it saved me:
Before connecting the phone, open the keypad and dial *#7284#
you will see a menu for UART and USB.
Under USB, select PDA. If PDA is already selected, select MODEM and then back to PDA
Connect: everything works again. Wonder why the phone sometimes blows a fuse... its working

I had a problem connection the S2 to a laptop. It used to work, but today it didn't. The laptop/S2 just didn't connect, no errors either side.

It turned out that the USB cable was the problem. I used the one that came with my LG phone, failed. Then I tried the one that came with the S2, worked. Even though the cables "look" identical, clearly they are not actually the same.

BTW, I used the second method "Go to Settings > Wireless & Network > USB utilities and click the button > then (and ONLY then) plug in USB cable"

IY's method works for me ^^

Thanks.. searched all over in androidforums.. did not get a clue on how to get my S2 to show up on my computer.. your tips helped !!!

Thank you so much for that information. it worked

Thank youuuuuuu! I even downloaded something for usb connection, and I had no idea what to do with it :)) but then I found you... :))) thanx!!!

i tried everything.. but still.. it cant recognize my phone what should i do please help me

does this supports or windows xp?

which device goes through these steps "Menu > Settings > Applications"?

Thanks A LOT for the help!!! :D

still the same problem....its not working..saying cannot install the driver.when i update it internet says u have the latest driver..im using windows 7

Post a Comment